ASKOMA AHIR-BI-plus-4.4 Benutzerhandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Warmwasserbereiter ASKOMA AHIR-BI-plus-4.4 herunter. ASKOMA AHIR-BI-plus-4.4 10 Seiten. Screw-in heater r1 1/2 for drinking and heating water
Auch für ASKOMA AHIR-BI-plus-4.4: Montageanleitung, Benutzerhandbuch und Service (10 seiten), Montageanleitung, Benutzerhandbuch und Service (9 seiten)
Seite drucken
ASKOHEAT+
Assembly instructions
A s s e m b l y i n s t r u c t i o n s
1 .
S c r e w i n t h e s c r e w ‐ i n h e a t e r
‐ Seal 1½" thread with suitable sealing material and screw in
‐ Align hea ng element, check installa on posi on — all electrical connec ons on the bo om
‐ For stainless steel storage tanks, open the housing cover and change the dip switch inside
the device
‐ Fill the tank and check for leaks
2 .
C o n n e c t t h e s c r e w ‐ i n h e a t e r e l e c t r i c a l l y
‐ Plug Z1—Connect the power supply to the hea ng element as follows:
Connec on 1:
Connec on 2:
Connec on 3:
Connec on N:
Connec on PE: PE
‐ Plug Z2—Temperature sensor (op onal)
Connec on 2:
Connec on 3:
Connec on 4:
Connec on 5:
Connec on 6:
‐ Plug Z3—Heat pump request / 0‐10V analogue signal (op onal)
MV‐012‐6391.2
Insulated moun ng
Screw‐in heater R 1½"
L1
L2
L3
N
Connec on 1:
Temperature sensor 1
Temperature sensor 2
Temperature sensor 3
Temperature sensor 4
GND
Relay K4
Connec on 1:
GND
Connec on 2:
Heat pump request
Connec on 3:
Analogue input 0‐10V
Connec on 4:
RS485: A
Connec on 5:
RS485: B
Connec on 6:
RS485: GND
01.04.2022
www.askoma.com
Page 4