ASL INTERCOM WMC01 Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Controller ASL INTERCOM WMC01 herunter. ASL INTERCOM WMC01 20 Seiten. Wall mount controller source select and volume control
Auch für ASL INTERCOM WMC01: Installationshandbuch (12 seiten)

Seite drucken

Set Up

3
3.1

Mode

The WMC01 can operate in one of two modes - analogue or IP. Both modes provide the same features.
In analogue mode: a standard VIPEDIA-12 audio input provides the necessary power, communications and audio link. In
this mode, a direct CAT5 cable is required between the WMC01 and VIPEDIA-12.
In IP mode, the communications and audio link between the VIPEDIA-12 and WMC01 is over IP, whilst power is supplied
party PoE. The unit can either be connected directly to one of VIPEDIA-12's Ethernet ports, or through an
rd
by external/3
existing network.
3.2

Power

Set the power jumpers on the rear side of the WMC01 for to the selected mode (analogue or IP) as shown in Figure 1
below.
Figure 1 - Power Jumper Settings
Analogue Mode
Jumper Settings
1) Disconnect power before changing link settings.
2) PoE and RTR links must NOT be fitted simultaneously
WMC01 – User's Manual
IP/PoE Mode
Jumper Settings
U-0664-0833-WMC_User_Manual.docx – Issue: 02 complete, approved
Page 7 of 20