aero-naut Galaxy Bauanleitung - Seite 2
Blättern Sie online oder laden Sie pdf Bauanleitung für Spielzeug aero-naut Galaxy herunter. aero-naut Galaxy 7 Seiten.
Seite drucken
Parts List
Primary components:
1) Fuselage, white pigmented, with V-tail joiners
2) V-tail panels with control surfaces
3) Wing centre section
4) Outboard wing panels with ailerons + winglets
5) Aileron servo covers
Contents, small parts bag:
6) Motor bulkhead
7) Fuselage former for tail 'snakes'
8) V-tail pushrod
9) Fuselage servo plate
10) V-tail horn
11) Ball-link
12) Threaded coupler, bored 0.8 mm, threaded M2 4
13) Pinned clevis, V-tail
14) Front wing joiner, pre-formed
15) Rear wing joiner, pre-formed
16) Wing locating peg, leading edge
17) Wing retaining screw
18) Control surface horn
19) Pinned clevis, aileron
20) Threaded coupler, bored 1.6 mm, threaded M2 2
21) Aileron pushrod
22) Aileron servo mount
23) Threaded sleeve
24) Spreader disc for threaded sleeve
25) Building instructions
Essential accessories
Modelling knife, metal file, ruler, set of screwdrivers, 5-minute epoxy, thin cyano-acrylate, paper mask-
ing tape, soldering iron, two 60 cm servo extension leads.
Recommended RC equipment
• Four servos (all 9 - 13 mm)
• Receiver (min. four channels)
• Transmitter with V-tail mixer
Recommended power system
•
Motor: Actro C8 18A
(Order No. 7002/38)
•
Speed controller:
(Order No. 7002/51)
•
Folding propeller:
(Order No. 7234/46)
•
Flight battery: 3S LiPo, approx. 2200 mAh
Galaxy building instructions
1
2 (l + r)
1
2 (l + r)
1 pair
1
1
2
1
2
2
2 sets
2
2
1
1
2
2 sets
2
2 pairs
1
1
1
Actronic 40bec
12 x 6.5"
Galaxy
GRP, ready made
Wood construction, ready made
Wood construction, ready made
Wood construction, ready made
Vac.-moulded plastic
GRP, ready made
Wood, ready made
Steel wire, 0.8 Ø x 800 mm
Poplar plywood, machined
Pre-formed steel rod with linkage ball
Plastic, ready made
Brass, ready made
Ready made
Steel, 3 Ø x 110 mm
Steel, 2 Ø x 110 mm
Beech, 4 Ø x 40 mm
Nylon, M5 x 20 mm
Plastic, ready made
Ready made
Brass, ready made
Rod with Z-bend, 75 mm
Wood, ready made
Ready made, M4
Wood, ready made
Ready made
2