Aktobis WDH-BGP03 Schnellstart-Handbuch - Seite 2
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Heizgerät Aktobis WDH-BGP03 herunter. Aktobis WDH-BGP03 8 Seiten.
Seite drucken
During the first operation:
As the heating elements are covered with a light film of oil at the factory for reasons of
protection, you will notice a slight smell of burning and possibly also some smoke
during the first operation. This is quite normal at first and is caused by the fact that the
oil film is now burnt by the heating elements during operation.
Important safety instructions:
-
The heater is not suitable for use outdoors or in other wet or damp environments !
-
Please note that the heater can become very hot during operation, so keep a
sufficient distance from flammable or easily combustible objects at all times !
-
Do not place the heater directly next to a power socket !
-
Do not use a timer or automatic on/off switch in conjunction with this heater !
-
Never use the heater on moving surfaces, objects or vehicles ! There is a risk that
the heater may tip over.
-
It is recommended to use a separate power source (socket) only for the supply of
the heater. (Please do not use multiple sockets to operate the heater.)
Furthermore, please ensure that the power cable is always laid with sufficient
distance to the heat source.
-
Supervise the heater when children are near the appliance !
-
Watch out for electricity, never walk into or insert objects into the appliance !
-
Do not place any objects on the heater !
-
Do not block the supply and/or exhaust air of the unit and please ensure sufficient
space/clearance around the unit !
-
Ensure that there is sufficient air supply to the unit, otherwise it can lead to a
reduction in performance and, in the worst case, to overheating and/or fire !
-
Only qualified personnel or electricians are allowed to open the unit !
-
Make sure that no moisture gets into or onto the unit !
-
Only use the recommended voltage for operating the unit !
-
Make sure that the power cable is unfolded (untied) before connecting it to the
socket !
-
Make sure that the plug is cleanly and properly connected to the socket before
using the appliance !