Akuvox C312X Kurzanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Kurzanleitung für Intercom System Akuvox C312X herunter. Akuvox C312X 4 Seiten.

Seite drucken
Installation
Step 1: Integrated Wall Bracket Installation
Without embedded junction box in the wall.
According to the position of the cable,
cut a circular hole in the wall of the
diameter of 68 mm and depth of 50
mm that can accommodate and
through out all necessary cables.
Finish the bracket installation.
With embedded one-gang junction box (86x86mm or 2x3 inches in size) in
the wall.
Connect the cables in
embedded box to
corresponding ports of
integrated wall bracket.
Place the integrated wall bracket in the
cut hole and adjust to the horizontal
position. Mark the upper and lower
screw holes as the pic shown above.
Fix the integrated wall bracket on
the wall with two ST4x20 screws.
or
Remove the integrated wall bracket
and use the 5 mm drill to drill 2 screw
holes with a depth of 25 mm at the
marked position, then insert the 2
screw fixing seats provided.
With 86x86mm junction box
Fix the integrated wall bracket
to the junction box with two
M4x30 screws.
With 2x3 inches junction box
Fix the integrated wall bracket to
the junction box with two M4x20
screws.
Connect the cables to corresponding
ports of integrated wall bracket.
Finish the bracket installation.