Akw M17 DigiPump Installations- und Pflegeanleitung - Seite 20

Blättern Sie online oder laden Sie pdf Installations- und Pflegeanleitung für Sanitärprodukt Akw M17 DigiPump herunter. Akw M17 DigiPump 20 Seiten. Digipump

Seite drucken
Important Safety
Information
ALWAYS read these installation
instructions carefully before installing
this product and leave with the end user
for future reference.
STOP
Lethal Voltage present on the AC supply to the
pump inner case. This unit must be connected
to a double-pole switched supply, suitably
fused and provided with a RCD protection.
STOP
This product must be installed by a qualified
and competent person and in accordance with
the current edition of the Wiring Regulations
STOP
BS7671.
This appliance must be located to comply
STOP
with the safety zones as defined in the wiring
regulations.
STOP
Isolate this unit before access for maintenance
or any other purpose. Do not immerse in
STOP
water.
STOP
There are no user serviceable parts within
case.
The cover must only be removed by an
STOP
competent person or electrician.
STOP
Caution! Always check for electric cables
STOP
and water pipework before cutting into
walls, floor boards or drilling into surfaces.
STOP
STOP
STOP
STOP
STOP
STOP
These instructions are provided to advise the minimum standards of installation and recommends what the best practice for the installation is.
Due to the very wide variability of possible installation conditions, AKW cannot provide all circumstances for the installation. AKW cannot accept any
liability in connection with this information or its use. This information is provided on the condition that the person receiving it shall make his/her
own tests to determine the suitability for the particular purpose. Failure to install this AKW product in accordance with supplied instructions or the
making of unauthorised modifications will invalidate any warranty and may affect product safety.
© 2019 AKW-LTD
STOP
STOP
STOP
STOP
STOP
STOP
STOP
What to do if something goes wrong?
STOP
In the event that you should encounter
a problem with this product,
please contact your local installer and
if this does not resolve the issue, then
contact AKW technical team who will
provide further advice and, if necessary,
arrange for a maintenance engineer
to visit and report any issues.
As part of our quality and training
program, calls may be monitored or
recorded. None of the foregoing affects
your statutory rights.
07-001-165-08
Technical Help line
01905 560219
Orderline
01905 823299
General Enquiries
01905 823298
Fax
01905 823297
Website
www.akw-ltd.co.uk
Quotes & orders email
Enquiries email
Post
AKW, Pointon Way,
Hampton Lovett,
Droitwich Spa,
WR9 0LR
None of the foregoing affects your statutory rights.
For the latest AKW product news
scan this QR code with your device.