Akw PW90 Einbauanleitung - Seite 3

Blättern Sie online oder laden Sie pdf Einbauanleitung für Sanitärprodukt Akw PW90 herunter. Akw PW90 4 Seiten. 15 & 22mm shower waste

Seite drucken

User Care Instructions

AKW wastes are designed for low maintenance and reliable operation. The water trap is located inside the waste

body and should be checked as part of a planned maintenance programme. Any part showing evidence of damage

or misuse must be replaced.

Keeping your wastes

clean

This product should be

cleaned periodically to

remove any accumulation

of hair or other waste

material, using normal

domestic bathroom

cleaning materials.

First remove the cover.

Then lift out the trap body.

Wash with warm soapy

water taking care not to

damage the rubber seal.

Always face the dry trap

arrow pointing towards

the waste outlet pipe after

cleaning.

Disinfecting

Where disinfecting is

necessary, standard

procedures for disinfecting

equipment should be used,

taking due care and

attention to the warning

signs concerning possible

effects of aggressive

chemicals on plastics.

After cleaning, always

flush down with water

then wipe thoroughly with

a damp cloth to remove

any cleaning material

residues before drying.

Do not use strong or concentrated acidic, alkaline or other cleaning materials as these may discolour or otherwise

damage the product. Do not use abrasive cloths. AKW does not approve or recommend autoclave cleaning of

any of the components due to the damage which this can cause to the special engineering plastics used in the

construction of this product.

Packaging

Wastes are supplied in a polypropylene (PP) bag to keep the product unsoiled until installation; it may also be

packed in a cardboard box. Both are suitable for recycling operations and should be disposed of in accordance

with local recycling regulations.

Waste Trap

Body

ONYX PW90

22mm

Clamping

Ring

Clamping

Ring Seal

Outlet Pipe

15/22mm

"C" Clip

(B)

(A)

Waste Main Body

15/22mm