Canon CanoScan D1230UF Benutzerhandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Scanner Canon CanoScan D1230UF herunter. Canon CanoScan D1230UF 32 Seiten. Usb flatbed scanner
Auch für Canon CanoScan D1230UF: Schnellstart-Handbuch (15 seiten), Benutzerhandbuch (27 seiten), Spezifikation (2 seiten)

Seite drucken

Film Mode

If [Sleeve] is selected in the Scan frame type, then you can set the [Frame select button].

Determines whether or not the scanner

driver starts (only applicable to the save

and scan (1-3) functions.

If [Expert scanning] is selected, the scanner driver

will start after you close the dialog. If [Quick and

easy scanning] is selected, the scan will start

directly after simple step settings.

Film type

Select from among Color Negatives, Color

Positives, Monochrome Negatives, and

Monochrome Positives. ScanGear Toolbox only

supports 35 mm film (strips or slides).

Image quality

Select a dpi setting from 150/300/600/720/

1200/2400.

Scan frame type

(Your scanner model and optional equipment

will determine whether or not this category

appears.)

Select Sleeve or Mount.

Frame select button

You can select the frame(s) for scanning. If

more than one is selected, the selected function

(fax, copy, etc.) will be repeated as many times

as the number of frames selected. Please note

that with consecutive scans, the spaces

between frames on the film may be scanned

and produce vertical lines on the scanned

images. This occurs because the spaces

between frames vary slightly between films and

may cause the scan area to extend beyond the

image in the frame. If this occurs, place the

objective frame in the first position and scan

one frame at a time.

When 35 mm film is scanned without starting

up the driver software, the scanned image will

encompass slightly less than the entire image in

the frame.