Astro Pneumatic Tool 30570 Handbuch - Seite 9

Blättern Sie online oder laden Sie pdf Handbuch für Sander Astro Pneumatic Tool 30570 herunter. Astro Pneumatic Tool 30570 9 Seiten. 20v 7" brushless variable speed rotary polisher w/ 2 batteries

Seite drucken
30570
Model:
Warning: To reduce the risk of injury, follow
instructions for preventing snagging. Snagging
may cause the tool to kick back and the operator
to suddenly lose control of the tool. Always use
side handle to maintain control.
PREVENTING SNAGGING
Snagging occurs when polishing pads get caught
on rough edges of a work surface. Snagging can
cause the tool to suddenly "kick back" and it may
cause the pad to burn through the paint. To reduce
the risk of snagging, use the polisher at low speeds
when polish-ing rough surfaces. For tricky areas
such as near trim or between a mirror and window
on a car, do not take chances with a polisher.
Polish these surfaces by hand.
PRESELECTING SPEED (FIG. 6)
Warning: Operate with a belt speed adapted
to the application in order to prevent damage to
the material.
a) This tool is equipped with 6 belt speed controls
which can be found in the button of the tool.
b) The required belt speed depends on the material
being polished and on the working conditions,
and can be determined by practical testing.

PARTS BREAKDOWN

2
1
6
3
4
Product Type:
20V 7" BRUSHLESS VARIABLE SPEED
ROTARY POLISHER W/ 2 BATTERIES
c) When using a fleece belt, do not work with
a higher setting than speed stage 6 (max.).
Otherwise, the fleece belt will become too hot.
Speed Control
6 - speed selections
MAINTENANCE
Warning: When service is required, only use
the same or equivalent parts from Astro. Using
parts from different brands might cause danger
or tool damage.
When replacing parts, remove the battery from
the tool to avoid accidental start-up.
After use, check tool to keep it in top condition,
a) Clean out accumulated dust.
b) The ventilation slots of the tool must be kept
clear at all times. Use only Astro 30570
accessories and spare parts.
c) Do not make any adjustment while the motor
is in motion.
d) Refer to the label for production date.
Warning: To avoid possible serious injury
always remove the battery before changing
any parts.
Call 1.800.221.9705 for questions concerning
performance of the product or other inquiries.
5
Parts List
Index
Part No.
1
30570-01
2
30570-02
3
30570-03
4
30570-04
5
30570-05
6
30570-06
Page 9
Electronic
FIG. 6
Description
Polisher
Battery
7" Pad
Charger
Bale Handle
Dust Screen
Qty
1
2
1
1
1
2
911