Acer Aspire 3200 Benutzerhandbuch - Seite 22

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Desktop Acer Aspire 3200 herunter. Acer Aspire 3200 29 Seiten. Acer aspire 6200: user guide

Seite drucken

3 • Use a lint-free cloth or a cotton swab dipped in rubbing

alcohol to clean all moving parts.

4 • Insert the ball back into the mouse and replace the ring,

making sure to turn the ring clockwise until it is securely back

in place.

My sound is bad or uneven or my system has no sound.

1 • Turn up the volume on the keyboard control. .

2 • In Windows 98, double-click on the Volume icon (located

near the clock in the taskbar) to verify that the volume control

is up and mute is not turned on, or use the volume knob on

your keyboard.

3 • Refer to My Aspire Guide and choose Troubleshooting.

My system freezes.

If your system hangs up, or freezes for some reason, you can re-

boot (restart) the computer by pressing the Ctrl+Alt+Del

keys simultaneously. Follow instructions on the screen.

If this does not successfully restart the system, you have anoth-

er option:

1 • Push the Power button on your computer, holding it in for

approximately four seconds or until your screen goes dark. This

will completely turn off your computer.

2 • Push the Power button again to turn the computer back on.

Note: Whenever you reboot your system, you will lose any unsaved

data.

My floppy drive won't read my disk.

1 • Eject the disk from the floppy drive, then reinsert it and try

again.

2 • Verify that the disk is correctly formatted. You will lose any

data on this disk if you format it.

3 • Verify that the problem is the disk, not the drive, by check-

ing another floppy that you know is valid.

Troubleshooting–Error Messages

I keep getting one of the following error messages:

Equipment Configuration Error

This error occurs when the CMOS settings (see glossary on My

Aspire Guide software) have been changed to a configuration

that prevents successful boot-up. Press the Ctrl + Alt + Esc

keys, after the beep during the boot process, then select

Restore Default Settings to restore the original CMOS values.

CMOS Battery Error

Call Acer Technical Support.

CMOS Checksum Error

Press the Ctrl + Alt + Esc keys, after the beep during the boot

process, then select Restore Default Settings to restore the

original CMOS values. If the error message continues, call Acer

Technical Support.

Diskette Drive Controller Error or Not Installed

Call Acer Technical Support.

Diskette Drive Error

Diskette may be defective. Verify with a known good diskette.

Diskette Drive A: Type Mismatch

Press the Ctrl + Alt + Esc keys, after the beep during the boot

process, then select Restore Default Settings.

Hard disk Controller Error

Run the Hardware Diagnostics from the System Recovery CD.

Hard disk 0 Error

Refer to the My Aspire Guide 'Service Center' section and

choose the Maintenance Tools Menu, Scan Hard Drive for

Errors. Please contact Acer Technical Support for more help.

Hard disk 1 Error

Refer to the My Aspire Guide 'Service Center' section and

choose the Maintenance Tools Menu, Scan Hard Drive for

Errors.

Need Help?