Canon MLT (S) Benutzerhandbuch - Seite 16

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Software Canon MLT (S) herunter. Canon MLT (S) 28 Seiten. Cxdi image processing software

2.Edit Exposure Mode Settings

2.4.2 Setting low-density sections

Enable dynamic range adjustment (BRIGHT REGION)

Each time [BRIGHT REGION] is touched, the setting switches between the highlight

(white outline characters against a colored background) and normal display. This is

enabled when in the highlighted state.

Screen Appearance when Dynamic Range Adjustment (BRIGHT REGION) is Enabled

Set the minimum density

Touch the

20.

The value on the left is the setting saved previously, and the value on the right is the

modified value.

This value determines the minimum density assigned to the subject range. Larger values

result in higher minimum densities, and smaller values result in lower minimum densities.

NOTE:

If the EFFECT parameter is set to a value that is too high, artifacts can occur

in the image, or the effective data of the exposure image may be damaged.

Check the exposure image, and if the image is proccessed excessively, either

set to a smaller minimum density or disable the setting.

button, and set the EFFECT parameter within the range between 1 to

– 10 –