Akyga AK-CA-24 Benutzerhandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Controller Akyga AK-CA-24 herunter. Akyga AK-CA-24 5 Seiten.
Seite drucken
AK-CA-24 - user manual
1.
Turn off the power to the computer.
2.
Pull out the dust cover from the front side of the case.
3.
Slide the controller into the 5.25" bay.
4.
Screw the controller to the case.
5.
Connect the controller to the respective components:
a) Plug the Molex connector into the ATX power supply.
b) Plug the USB connector into the matching USB 3.0 socket on your mainboard.
c) Plug in the 4-pin connectors of the two fans.
d) Install thermometers around the CPU and in the centre of the case (SYS).
6.
The controller is now ready for use.
Sound Alarm:
The controller has a built-in alarm that informs:
a) when the fan speed decreases below 200 RPM or when it stops completely,
b) when the temperature inside the enclosure exceeds 70°C.
Cleaning
Disconect the power supply from the electrical socket and connected devices before cleaning.
Use soft and antistatic cloth for cleaning the power supply.
ź
Do not use abrasive or chemical cleaners.
ź
Do not immerse the controller in water.
ź
Technical specfication
Product code:
Supply voltage:
Output voltage range:
Power supply connector:
Connectors:
Cable length:
Installation location:
Material:
Product size:
Net weight:
Compilance with standards:
EAN code :
Product manufacturer:
AK-CA-24
12 V
7.9-12 V
Molex
USB 19-pin + 2x 4-pin
30 cm
5.25" drive bay
ABS + metal
150x85x35 mm
215 g
CE, FCC, RoHS
5901720131621
Akyga Europe sp. z o.o.
ul. Wrocławska 1c
52-200 Suchy Dwór
p. 5