Asus YNRC-BR Benutzerhandbuch - Seite 18

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Hauptplatine Asus YNRC-BR herunter. Asus YNRC-BR 22 Seiten.

ATX Micro-Fit power connectors (24-pin ATXPWR1)

These connectors are for an ATX Micro-Fit power supply. The plugs

from the power supply are designed to ﬁt these connectors in only one

orientation. Find the proper orientation and push down ﬁrmly until the

connectors completely ﬁt.

•

YNRC-BR ATX power connector

USB connectors (9-1 pin FRONT_USB2)

These connectors are for USB 2.0 ports. Connect the USB/GAME module

cable to any of these connectors, then install the module to a slot opening

at the back of the system chassis. These USB connectors comply with USB

2.0 speciﬁcation that supports up to 480 Mbps connection speed.

YNRC-BR USB 2.0 connectors

Never connect a 1394 cable to the USB connectors. Doing so will damage

the motherboard!

Make sure that your ATX 12V power supply can provide 8A on the +12V

lead and at least 1A on the +5-volt standby lead (+5VSB). The minimum

recommended wattage is 230W, or 300W for a fully conﬁgured system.

The system can become unstable and might experience difﬁculty

powering up if the power supply is inadequate.

You must install a PSU with a higher power rating if you intend to install

additional devices.

ATXPWR1

F_USB2

GND

USB_P8+

USB_P7+

USB_P8-

USB_P7-

USB+5V

F_USB1

GND

USB_P6+

USB_P5+

USB_P6-

USB_P5-

USB+5V

ASUS P5RC-BR