Akytec ITP14-G Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Messgeräte Akytec ITP14-G herunter. Akytec ITP14-G 10 Seiten. Universal process indicator

►

Signal cables should be routed separately or screened from the supply cables.

NOTICE

Only a shielded cable may be used for signal lines.

–

The electrical connections are shown in Fig. 5.2-5.4, the terminal assignments in Table

5.1.

–

Connect the power supply to the terminals 24V+ / 24V–

–

Ensure that the device is provided with its own power supply line and electric fuse I = 0.5

–

The maximum conductor cross-section is 1 mm². Wires should be stripped for approx. 8-

10 mm.

5.1.1

Table 5.1 Terminal assignment

5.1.2

The NPN transistor output is designed to control the low voltage relay up to 42 V DC / 200

►

As a precaution against inadvertent current reversal on output, a parallel diode (U

NOTICE

≥ 1.3U, I

akYtec GmbH · Vahrenwalder Str. 269 A · 30179 Hannover · Germany Tel.: +49 (0) 511 16 59 672-0 ·

Input

Fig. 5.2 Current sensor wiring

Designation

24VDC -

24VDC +

≥ 1.3I) is usually included in the output circuit.

Fig. 5.1 Mounting

Fig. 5.3 Voltage sensor wiring

Description

Power supply

DO-

Output -

DO+

Output +

COM

Common -

U+

Voltage input +

I+

Current input +