Asus AP5000 Installationshandbuch - Seite 21

Blättern Sie online oder laden Sie pdf Installationshandbuch für Server Asus AP5000 herunter. Asus AP5000 32 Seiten. Dual pentium ii server platform

III. Integration Procedures

Installing a slot card

To install a slot card with a Hot-Swap drive bay, there are two types of

cabling methods as shown below; One is for SAF-TE back plane boards

(Fig: 3-20), another is for none SAF-TE back plane boards (Fig: 3-21).

To install SAF-TE one, the five cables should connect to the slot card and

the connections on the other end should be; two cables for SCSI device and

the other three for drive bay, shown below:

KEY

SLED

Jumpers for Drive Bay

CAUTION

* PLED cable, 3-wire (Orange/Black/

Green), connects Green to position #1

of PLED jumper.

* SLED cable, 3-wire (Green/Black/Red)

connects Red to position #1 of SLED

jumper.

* KEY cable, 2-wire (Black/Red) connects

Black to position #1 of KEY jumper.

Fig 3-20: Jumper Location & Cabling with SAF-TE Features

ASUS AP5000 Installation Guide

PLED

ALED_IN

Jumpers for SCSI Drive

* SCSI_ID cable, 8-wire, connects be-

tween SCSI_ID jumper of slot card and

ID jumper of SCSI drive. Be sure their

SCSI ID matched

* ALED_IN cable, 2-wire, connects be-

tween ALED_IN of slot card and access

jumper of SCSI drive.

SCSI_ID