Amphenol Procom PRO-DAR8 Benutzerhandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Empfänger Amphenol Procom PRO-DAR8 herunter. Amphenol Procom PRO-DAR8 15 Seiten. 19” rack-mountable dual amplifier receiver multicoupler

Seite drucken

However, if any malfunction of the multicoupler RF amplifier system occurs, the POWER LED

on the front plate will immediately light with flashing red color and indicate that some fault

condition has occurred.

Please refer to chapter 9: "Trouble shooting" below.

If the instructions in the Trouble shooting chapter is insufficient, please contact nearest

PROCOM dealer or Amphenol Procom for further information.

9 Trouble shooting

Symptom

POWER LED off

AC or DC fuse blown,

POWER LED off

AC fuse blown

DC fuse blown

Reduced receiver

sensitivity

POWER LED lights

with flashing red light

Other fault symptoms

9.1

Spare Parts

Article

Fuse for 230 VAC

Fuse for 115 VAC

Fuse for 12 VDC/24 VDC

Fuse for 48 VDC

Phoenix cable connector 7.62 mm

female for DC supply connection

Phoenix cable connector 5.08 mm

female for ALARM connection

Possible cause

Supply voltage not

connected or off.

Internal circuitry fault

By DC voltage

operation, wrong DC

polarity.

Supply voltage not

connected or off.

Internal amplifier fault

Value

T315mAL250V 5x20 mm

T500mAL250V 5x20 mm

T2AL250V 5x20 mm

T315mAL250V 5x20 mm

Page 15 of 15

Action

Connect supply voltage.

Check and replace fuse(s).

Contact Amphenol Procom.

Check DC voltage and polarity and

reverse connections if necessary.

Connect supply voltage.

Contact Amphenol Procom.

Amphenol

Procom

Spare part no.

661001008

661001096

661000047

661001008

662001103

662001102