DPA 4062 Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Mikrofon DPA 4062 herunter. DPA 4062 16 Seiten. Miniature microphones

provided by the soft boost grid (position A).

Placements on the chest or near the ear of

the performer require a 10dB boost at 12

kHz for the microphone to sound natural

(position B). This acoustical equalization is

noiseless and is provided by the high boost

grid. Type 4065 Miniature Microphone

Headband is only supplied with the soft

boost grid, as the microphone will always

be placed near the mouth.

Note: The microphone is supplied with

the soft boost grid fitted. This grid

must be removed before being

replaced by the high boost grid. Avoid

excessive force or tampering when

removing or mounting the grid as it

may cause damage to the grid and the

net on top of the grid may become

detached.

Correct use of the microphone

element

The diaphragm in the microphone element

is the most sensitive part of the unit and

as emphasized earlier, it must be left

untouched to preserve its original charac-

teristics. Do not spray any substances

such as hair spray directly into the micro-

phone and avoid getting make-up or paint

on the microphone element and housing.

The protection grids are available in three

standard colours: Black, beige and white.

Check if a different coloured protection

grid will be less visible before painting or

colouring a microphone grid.

Tip: In lapel or tie placement it is re-

commended that the microphone grid

point away from the mouth to

decrease breathing noises caused by

the mouth or nose of the performer.

The microphone element is completely

omnidirectional at all frequencies, so

this method will not colour the sound.

DMM0008 Miniature Clip, Double Lock