Amprobe AM-420 Benutzerhandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Multimeter Amprobe AM-420 herunter. Amprobe AM-420 16 Seiten. Digital multimeter

BATTERY AND FUSE REPLACEMENT

X�

Warning

To avoid shock, injury, or damage to the Meter, disconnect the test lead from

the measuring circuit before opening case. Use ONLY fuse with the amperage,

interrupt, voltage, and speed ratings specified.

Replacing BATTERY and FUSE follow below steps:

1. Disconnect the test lead probe from measuring circuit.

2. Turn the Meter to OFF position.

3. Remove holster and the screws from the back cover, and then open the back

cover.

4. Battery replacement: Remove the battery and replace with one 9 V Alkaline

battery (6LF22, 6LR61, MN1604) or equivalent. Pay attention to the polarity

signs.

5. Fuse replacement: Replace the broken fuse F1 with rating 315 mA H 250 V

fast-fuse, ( 5×20)mm.

6. Put the back cover back, re-fasten the screw and install the holster back.

Battery: 9 V alkaline batteries (6LF22, 6LR61, MN1604) or equivalent

Fuse: 315 mA H 250 V fast-fuse, ( 5×20)mm

Fuse