AMS TMD2636 EVM Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kontrolleinheit AMS TMD2636 EVM herunter. AMS TMD2636 EVM 17 Seiten. Miniature proximity sensor module
Auch für AMS TMD2636 EVM: Schnellstart-Handbuch (9 seiten)

Seite drucken

Software Description

The main window (Figure 3) contains the system menus, system level controls, device information and

logging status. The main window contains only one tab "Prox" to configure the parameters to run

proximity. The prox data and its average data is also plotted in this tab. The application polls the prox

raw data continuously.

Figure 3:

GUI Main Window

4.1

Connect Software to Hardware

On startup, the software automatically connects to the hardware. On successful initialization, the

software displays a main window, containing controls pertinent to the connected device. If the software

detects an error, an error window appears. If "Device not found or is unsupported" appears, verify the

correct daughterboard is properly connected to the EVM controller board. If "Cannot connect to EVM

board" appears, verify the USB cable is connected. When the EVM controller board is connected to

the USB, a green LED lights on power up to indicate the USB cable is connected and providing power

to the system. The LED will remain lit until the any software application opens the controller. The light

will then be switched off so that it will not interfere with any light measurements.

If the EVM board disconnects from the USB bus while the program is running, it displays an error

message and then terminates. Reconnect the EVM board and restart the program.

Eval Kit Manual • PUBLIC

UG001002 • v1-00 • 2021-Jan-18

Document Feedback

TMD2636

Software Description

│ 6