AmScope SE303-P Benutzerhandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Mikroskop AmScope SE303-P herunter. AmScope SE303-P 19 Seiten.

SE300 Series

Attaching a Camera

If you have an AmScope MD series camera, you only need the 30.5mm adapter that comes with it to attach

it to SE300 series microscope. However, you may need an adapter if you have a non-AmScope brand

camera.

1. Remove one of the eyepieces from the eyetube.

2. Insert the 30.5mm adapter that comes with all AmScope MD cameras into the eyetube.

3. Drop the camera into the eyetube through the adapter.

Note: C-mount cameras are not compatible with the SE300.

1. Turn off the power and unplug the microscope. Wait until the bulb cools down.

2. If change the top light's bulb, loosen the lock-screw on the lamp housing. Take off the lamp cover,

remove the old bulb, and replace with a new one. Replace the lamp cover and re-tighten its lock-screw.

3. If changing the bottom light's bulb, press down on one side of the plastic stage so that the other side lifts

up. Remove stage. Carefully remove the old bulb from the socket and replace with a new one. Replace

the stage. This applies to models SE305 through SE308 only.

Operation