Dr. Kern Skinfresh Tancan 3000 Montage- und Betriebsanleitung - Seite 8

Blättern Sie online oder laden Sie pdf Montage- und Betriebsanleitung für Körperpflegeprodukte Dr. Kern Skinfresh Tancan 3000 herunter. Dr. Kern Skinfresh Tancan 3000 18 Seiten.

Seite drucken

Now lift the stand foot (8) on the lower left

side into the positioning tongue (14) in the

baseplate (Fig. 9).

The current assembly condition is shown in

Fig. 10.

Note! Both elements must be held in the

upright position until they are bolted to-

gether.

Bolting together the two elements at stand

foot (7).

For this step, you will need two M10 nuts (5)

and 2 lock-washers (6) from the accessory

pack (Fig. 8).

Bolting together the two elements at the top

For this step, you will need the installation

plate (15), 4 nuts (5) and 4 lock-washers (6)

from the accessory pack.

M10 bolts (16) are provided in the upper sec-

tions of both elements. Place the installation

plate with its holes over the bolts (16), and

ﬁ x it ﬁ rmly in place using the nuts (Fig. 11.

Fig. 9

Fig. 10

The two elements are now assembled.

Note: Check the correct position in

relation to the baseplate and the ali-

gned position!

Installation of the exhaust air unit

Remove the complete preassembled exhaust

air unit from package 4 (Fig. 12):

The exhaust air unit is now lifted onto the

tanning elements (Fig. 13).

Fig. 11

Fig. 13

Fig. 12