Alemlube HR90045 Technisches Handbuch für den Eigentümer - Seite 6
Blättern Sie online oder laden Sie pdf Technisches Handbuch für den Eigentümer für Werkzeuge Alemlube HR90045 herunter. Alemlube HR90045 10 Seiten. Spring rewind hose reel
Seite drucken
Parts and Drawing Instructions for HR90000 Series
Industrial Hose Reel 286X Series Instruction
3. Insert end of the hose through guide roller bracket, and feed through the opening in the drum
flange.
4. Use Teflon tape or pipe sealant on hose fitting threads, screw fitting into swivel and tighten.
Note: To avoid damage to the swivel, use a wrench to support the swivel fitting while
tightening the hose.
5. Attach hose stopper on the other end of hose, near the outlet fitting.
6. Carefully release drum latch, and slowly allow hose to wind onto the reel.
Note: Final spring tension adjustment is accomplished by adding wraps of hose around the
drum (to increase tension) or taking off wraps of hose (to decrease tension). Refer to:
Adjustment of Spring Tension.
HR90015 / HR90030 / HR90045 / HR90065 / HR90075
& HR90010 / HR90025 / HR90040 / HR90050 / HR90055 / HR90060 / HR90070
Wall & Floor & Ceiling
Wall
NSW
QLD / PNG
TEL: (02) 9677 1555
TEL: (07) 3204 9166
FAX: (02) 9675 1155
FAX: (07) 3204 1224
Visit our website at
HR90005 / HR90020 / HR90035 Wall & Floor
Wall
5 OF 9
VIC / TAS
TEL: (03) 8787 8288
FAX: (03) 8787 8266
www.alemlube.com.au
Floor
Floor
WA
SA / NT
TEL: (08) 9302 4199
TEL: (08) 8241 7111
FAX: (08) 9303 2095
FAX: (08) 8241 7011
or
www.alemlube.co.nz
Ceiling
NZ
TEL: (64) 9 447 1007
FAX: (64) 9 447 1008
6