Andatech ASC-200 Benutzerhandbuch - Seite 15
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Sicherheitskamera Andatech ASC-200 herunter. Andatech ASC-200 17 Seiten. Smart wireless solar camera
Seite druckenSolarCam keeps going offline
1. Make sure that the WiFi password is correct.
2. Make sure that you have internet access from the router.
3. Check that the router does not require special settings (such as log in or verification)
to log in to the internet.
Can't see live video on the phone.
Check the data traffic on the upper right corner of the mobile app. If it is not "0 kb"
and the app keeps on searching or cannot connect, it is probably caused by the short
bandwidth of your internet service. Please check with your internet provider to ensure
that you have at least 40kb/s of feasible bandwidth.
Can more than one person access the camera to view videos?
More than one person can access the camera to view live videos, but not at the same time.
The alarm does not work even after clicking Protection.
Check that the camera is not in "At Home" mode. In "At Home" mode, all cameras will be
on standby, and motion detection, message notification, and recording functions stop.
Will the camera record video if it does not have a TF card in it?
The camera must have a TF card in it to be able to record video.
How much data does the camera consume?
Live videos will consume about 2mb per minute. If using the audio function as well, it
will consume an additional 0.4mb per minute.
The mobile app cannot find the camera.
Make sure that your mobile phone is connected to the same WiFi network. Then, check
that the WiFi indicator on the camera is blinking in blue. If it is not, please press the
WiFi button for 3 seconds until the WiFi indicator light starts blinking.
How much can the TF card record?
The 16GB / 32GB TF card can store years of recordings (based on a recording of 10
events per day).
14