ATIGO A2102 Installationshandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Installationshandbuch für Intercom System ATIGO A2102 herunter. ATIGO A2102 15 Seiten. 2 wire digital video system

Seite drucken

Backup and restore

Audio/Video module is design to store
programmed information about user door
numbers, proximity tags and pin codes.
All information stored by the module can be
backed up and restored if necessary.
E.g.If keypad's Master PIN code is lost and
entire panel need to be reset to default.
Backup procedure
1.
Make sure all modules are
connected and powered up.
2.
Insert Micro SD card into the
speech module.
3.
Press and hold button A on the
speech module for 10 seconds and
release when you hear the beep,
and all lights turn on.
4.
Wait until you hear another beep,
and all lights turn off.
5.
Back is now complete.
Restore procedure
1.
Make sure all modules are
connected and powered up.
2.
Insert Micro SD card into the
speech module.
3.
Press and hold button B on the
speech module for 10 seconds and
release when you hear the beep,
and all lights turn on.
4.
Wait until you hear another beep,
and all lights turn off.
5.
Restore is now complete

Restore to factory default

Caution!
When using this procedure all information will
be lost and modules restored to default
factory settings.
You can reset Master PIN code without losing
all information by following backup and restore
procedure.
Once back up procedure is complete make
sure to remove file PASSWORD.BIN from
Micro SD card as this file holds old mater code
information.
Factory default procedure
1.
Make sure all modules are
connected and powered up.
Link together wires EB+ and EB –
2.
on audio/video module.
3.
On Switch ON and OFF DIP switch
6 four times then disconnect wires
EB+ and EB – .
Speech module will beep, and all
indicators will turn on. After about
15 seconds module will beep again,
and all indicators will turn off.
4.
All settings are now back to factory
default.