Dreamline ENIGMA SHDR-60727912 Series Installationsanleitung Handbuch - Seite 9

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Sanitärprodukt Dreamline ENIGMA SHDR-60727912 Series herunter. Dreamline ENIGMA SHDR-60727912 Series 17 Seiten. Shower door

Seite drucken

9. Once leveled, outline the Guide rail brackets' (#08)

position on the wall.

Carefully set the Stationary glass (#02) and Upper

Guide rail (#03) aside.

Remove the Guide rail brackets (#08) from the Upper

guide rail (#03), place the male part of the Upper

guide rail (#03) to the outlined positions on the wall

and mark the drilling holes. Drill the holes using

a Ø 3/8" drill bit.

Insert the **Wall anchors Ø3/8" (#09) and mount the

male part of the Guide rail brackets (#08) onto the

wall using the Large Truss head screws ST6×55 (#10).

See fig. 9 for details.

**NOTE:

The manufacturer strongly recommends

installing these guide rail brackets into studs or

preinstalled 2"x6" wood reinforcements behind the

wall.

For installation into a stud, drill a 1/4" hole up to

the stud and let the screw bore into the wood.

10. Apply a small amount of waterproof silicone into

the Threshold (#15) channel.

Place the Stationary glass (#02) back in position

and attach both female parts of the Guide rail

brackets (#08) to their male parts on the walls.

Tighten the set screws on the Guide rail brackets

(#08) to secure the Upper guide rail (#03)

between the two walls.

Upper guide rail (#03) must be leveled

horizontally. Adjust Guide rail bracket (#08)

using hex key on both ends if it necessary to level

the Upper guide rail (#03). Tighten the screws

from top and bottom of the Guide rail bracket

(#08).

See Fig. 10 and Fig. 11 for details.

"Enigma" Ver.4 Rev.5 02/2016

Ø 3/8"

Fig. 9

Fig. 10