Aleph ES-Series Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für DVR Aleph ES-Series herunter. Aleph ES-Series 11 Seiten. Hi performance embedded linux stand alone dvr

Seite drucken

II. HOW TO CONNECT THE DVR TO THE NETWORK AND INTERNET.

1. Assigning Network IP Address.

DVR must be assigned an IP address, subnet mask and gateway. To know what network settings to use, open

Windows command prompt on a pc connected to the same network as the DVR and type ipconfig to get the network

status of your existing computer.

ipconfig result

The Subnet Mask and Default Gateway will remain the same on the DVR but the IP address would be different mainly

the last octet or number. Each device on the network must have its own unique IP address. On the ipconfig example

above the IP address is 192.222.221.10, 10 being the last number. So assign to the DVR any last number between 2-9

and 11-254.

To assign the IP address click on

After assigning the IP address save the settings by clicking Save button, then do a menu restart.

Note:

If router has DHCP enabled, make sure to stay away from the DHCP IP address range to prevent network conflicts.

then

, network setting interface as shown

network status