Dreamline SHCM-2718-00 Installationshandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Installationshandbuch für Küche & Badarmaturen Dreamline SHCM-2718-00 herunter. Dreamline SHCM-2718-00 8 Seiten. Shower column

Seite drucken

Refer to the technical diagram to choose the proper location for your shower column. You can adjust the

column's vertical position based on the person's height. (Measurements given in the technical diagram

are based on the average human height – 68"-70").

1. Secure the Goose-neck shower arm (1) on to the column using nuts (2) and (3).

2. Place gasket (4) into L-fitting (5).

3. Connect L-fitting (5) with Shower arm water supply fitting (6).

4. Place rubber washer (7) into the Shower head (8).

5. Connect the Shower head (8) to the Shower arm (1).

6. Choose the proper location for your column and mark the drill holes (9). Drill the holes on the distance 4

¼" from each other.

7. Insert Wall anchors (10) inside the holes.

8. Tighten the screws (12) to the wall with stainless steel washers (11). Leave the screw heads ¼" from the

wall.

9. Connect the flexible hot (13) and cold (14) water supply lines to hot (15) and cold (16) water outlets

(supplied by your plumber) accordingly.

10. Hang the Mounting bracket (17) on the screws (12) secured in the wall.

11. Securing the Hand shower bracket: Place bracket (20) against wall in place you want to install hand

shower and mark the drill holes (18). Drill the holes. Insert Wall anchors (19) into the holes.

12. Secure the Hand shower bracket (22) to the wall by screws (21).

13. Attach the flexible shower hose (24) to the column body. NOTE: do not forget to use the rubber washer

(24) to prevent leakage on the connection. Flexible hose end with a nut should be attached to the

column.

14. Connect the handheld shower head (22) to the hose (24) placing the rubber washer (23) in the fastening

nut.

Corner installation

For Corner installation you need to install Corner mounting bracket (25). Refer to the technical diagram

to choose the proper location for your shower column. You can adjust the column's vertical position

based on the person's height. (Measurements given in the technical diagram are based on the average

human height – 68"-70").

6. Choose the proper location for your column and mark the drill holes (9). Drill the holes on the

distance 2 ¼" from corner.

7. Insert Wall anchors (10) inside the holes.

8. Attach Corner mounting bracket to the wall using screws (12) with stainless steel washers (11).

Rest of installation is the same as flat wall mounting.

Please, make sure that none of the hoses are bent or kinked after final installation. Check water

connections for proper flow; make sure there is no leakage.

Our product may have changes without prior notice

For the latest manual version, please, check online

www.bathauthority.com

Rev 1.1