Andonstar 246 Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Mikroskop Andonstar 246 herunter. Andonstar 246 14 Seiten.
Auch für Andonstar 246: Benutzerhandbuch (14 seiten)

Seite drucken

Lens D：

Working distance：4mm-5mm，

Magnification：450-510x（with3 times digital zoom)

Applications: Microscope slides etc.

Steps：In pic 7 it marked out which parts of the microscope are involved to each step.

①Install and fix lens D to the bottom of the focusing tube.

② Place a slide on the slides holder and power on the slides holder. (goose-neck spot lights can not

provide proper illumination in this case, so leave them and use the same interface to power on slides

holder)

③Loose the Arm V-locker, locate the whole monitor part to a desire height (distance from the lens to the

specimen should be around 4mm to 5mm), then fix the V-locker. Since the focus range is very short in

this case, we recommend users to adjust the height of the secondary bracket instead, which is more

precisely. The shorter the object distance is, the bigger magnification is.

④Turn the focusing tube to get a clear image. Turn it clockwise to zoom in and the other way to zoom

out.

*Lens D's magnification is quite big, which requires a short object distance. Meanwhile, any tiny

movement or shake of specimen would be displayed as huge on the monitor, which requires user to

operate very carefully and patiently.

（Pic 7 Go with lens D）