Electrolux EFC 90344 Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Lüftungshaube Electrolux EFC 90344 herunter. Electrolux EFC 90344 14 Seiten.
Auch für Electrolux EFC 90344: Benutzerhandbuch (44 seiten)

Seite drucken

CAUTION

Closely follow the instructions set out in this

manual. All responsibility, for any eventual

inconveniences, damages or ﬁ res caused

by not complying with the instructions in

this manual, is declined. The extractor hood

has been designed exclusively for domestic

use.

WARNING! Do not connect the appliance

to the mains until the installation is fully

complete.

Before any cleaning or maintenance

operation, disconnect hood from the mains

by removing the plug or disconnecting the

mains electrical supply.

Always wear work gloves for all installation

and maintenance operations.

The appliance is not intended for use by

children or persons with impaired physical,

sensorial or mental faculties, or if lacking

in experience or knowledge, unless they

are under supervision or have been trained

in the use of the appliance by a person

responsible for their safety.

This appliance is designed to be operated

by adults, children should be monitored

to ensure that they do not play with the

appliance. This appliance is designed to be

operated by adults. Children should not be

allowed to tamper with the controls or play

with the appliance.

Never use the hood without effectively

mounted grating!

The hood must NEVER be used as

a support surface unless speciﬁ cally

indicated.

The premises where the appliance is

nstalled must be sufﬁ ciently ventilated,

when the kitchen hood is used together

with other gas combustion devices or

other fuels. The ducting system for this

appliance must not be connected to

any existing ventilation system which is

being used for any other purpose such as

discharging exhaust fumes from appliances

burning gas or other fuels. The ﬂ aming of

foods beneath the hood itself is severely

prohibited.

The use of exposed ﬂ ames is detrimental

to the ﬁ lters and may cause a ﬁ re risk,

and must therefore be avoided in all

circumstances.

Any frying must be done with care in order

to make sure that the oil does not overheat

and ignite.

Accessible parts of the hood may became

hot when used with cooking appliance.

With regards to the technical and safety

measures to be adopted for fume

discharging it is important to closely follow

the regulations provided by the local

authorities.

The hood must be regularly cleaned on

both the inside and outside (AT LEAST

ONCE A MONTH).

This must be completed in accordance

with the maintenance instructions provided

in this manual). Failure to follow the

instructions provided in this user guide

regarding the cleaning of the hood and

ﬁ lters will lead to the risk of ﬁ res.

Do not use or leave the hood without the

lamp correctly mounted due to the possible

risk of electric shocks.

We will not accept any responsibility for

any faults, damage or ﬁ res caused to the

appliance as a result of the non-observance

of the instructions included in this manual.

USE

The hood has been made for use in the

internal recirculating ﬁ ltering version.

Cooking fumes and steam are aspirated

inside the hood, ﬁ ltered and cleaned,

passing through the fat ﬁ lter/s and the

carbon ﬁ lter/s that MUST be supplied with

the hood.

INSTALLATION

The mains power supply must correspond

to the rating indicated on the plate situated

inside the hood. If provided with a plug

connect the hood to a socket in compliance

with current regulations and positioned in

an accessible area, after installation. If it not

ﬁ tted with a plug (direct mains connection)

or if the plug is not located in an accessible

area, after installation, apply a double

pole switch in accordance with standards

which assures the complete disconnection

of the mains under conditions relating to

over-current category III, in accordance with

installation instructions.

Warning! Before re-connecting the hood

circuit to the mains supply and checking

the efﬁ cient function, always check that the

mains cable is correctly assembled.