Atlantic 89662 Produkthandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Produkthandbuch für Rasen- und Gartengeräte Atlantic 89662 herunter. Atlantic 89662 16 Seiten.

5. Install the top panel 74269 by inserting the slide lock tabs of all four small panels into the

receiving channels and slide until the panel is snug.

6. To complete the assembly, flip the Eco-Blox on its side and push down where the panels

meet until all edges are aligned.

7. IMPORTANT! Rotate the Eco-Blox so that the bottom panel is flat on the ground and the

top panel is facing up. In this position, the top panel is supported by the sides as well

as the center support panels. Eco-Blox must always be installed in this position.

Improper installation, with the edges of the support panels visible on top, will reduce the

structural integrity of the unit and may cause the Eco-Blox to fail.

Building Multiple Eco-Blox Modules

Start with an assembled Eco-Blox. The top panel

replaces the bottom panel from Step 1.

Begin by installing the 4 small panels from Step 2

onto the finished Eco-Blox and continue through

Step 7. Repeat for taller Eco-Blox modules.

Installation

Eco-Blox water matrix reservoirs are a strong,

versatile way to store water underground,

but a few guidelines must be followed for

proper performance and longevity.

EcoBlox must be oriented with the top panel

covering the edges of all vertical panels. Setting

the Eco-Blox on its end or side, with exposed edges

on top, will allow the panels to

decouple under load and potentially, collapse.

CORRECT

ORIENTATION

INCORRECT

ORIENTATION