Aleratec 1:1 HDD Cruiser Schnellstart-Handbuch - Seite 11

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Lagerung Aleratec 1:1 HDD Cruiser herunter. Aleratec 1:1 HDD Cruiser 17 Seiten.

Using the 1:1 HDD Cruiser

Open the drive tray doors by lifting the tab on the left side of each drive bay

you wish to use.

Take the Hard Disc Drive (HDD) and align the drive's SATA plug to the lower

right hand side of the drive bay.

Slide the HDD into the drive bay until it stops. The drive will still be about 1

inch outside of the bay. When the door is closed it will push and plug the HDD

into the duplicator.

Swing the drive bay door closed and press the left side of the door until the tab

latches. When it latches, a click can be felt and heard.

Note: If you are duplicating, the source hard disc drive goes in the top bay.