Atlas DSP2210 Benutzerhandbuch - Seite 15
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Atlas DSP2210 herunter. Atlas DSP2210 16 Seiten. Digital processor and amplifier
Seite drucken
Owner's Manual
SYSTEM AMPLIFIERS (x2)
•
Frequency response
•
Total distortion
•
Transformer output
•
Efficiency
•
Gain control
•
Power supply
•
Input impedance
•
Carrier frequency
•
Peak current
•
MTBF (Mean Time Between Failure) 100,000 hours
•
EMC / EMI radiation
SYSTEM MECHANICAL DATA
•
Dimensions (L x W x H)
•
Material (outer housing)
•
Finish
•
Printed circuit boards
•
Electronic components
•
Operating temperature
•
Storage temperature
•
Humidity
TROUBLESHOOTING GUIDE
1. Read and review all sections and follow instructions in this manual
2. Before terminating speakers to 'Speaker Output (70V)' Zones 1 and 2, verify that all wiring is free from shorts, opens, crosses,
ground problems or loose or frayed wiring. Ensure wiring follows the correct polarity (±) as shown in Section 4.2
3. Ensure AC power is correctly terminated with the IEC power cord provided. If after power is activated and system input and
output terminations are verified and no audio is detected, ensure all volume and activation settings have been properly set and
applied in the operating GUI / Sound Media Interface per instructions in Section 5.0 Ensure that all speakers are connected to
DSP2210/DSP2212.
4. If you continue to experience difficulty please contact Atlas Sound Customer Service department by telephone at 1-800-876-333,
online at www.AtlasSound.com, or by email at [email protected].
DSP2210 &
DSP2212
80Hz – 20kHz, ± 3dB
.001% typical at +4dB, 1kHz, 0dB gain
70.7V
85% or better
adjustable to 34dB
UL / CUL recognized
50kΩ
400kHz
1.2A
FCC Part 15 Class B, EN6100, CISPR 22
10.0" (254mm) x 19.0" (482.6mm) x 1.75" (44.45mm)
CRS (cold roll steel) 18AWG (.047" nominal)
Flat black powder coat with zinc undercoat corrosion resistant
UL recognized UL94VO
RoHS
0˚ to +50˚C
-40˚ to + 85˚C
95% non-condensing (max.)
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 15 –
Specifications are subject to change without notice.
Digital Processor
and Amplifier
AtlasSound.com