Atlas DSP2212 Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Atlas DSP2212 herunter. Atlas DSP2212 16 Seiten. Digital processor and amplifier

Seite drucken
Atlas DSP2212 Benutzerhandbuch
DSP2210 &
DSP2212
70V SPEAKER TERMINATION
Phoenix connectors are used and are keyed or polarized to fit one way, do not force fit these connectors and follow these basic instructions;
•
Do NOT force fit the connectors – they are polarized to fit in one direction
•
Follow the +/- wiring polarity for all speakers
•
Use only 70V speakers
•
Ensure that total speaker wattage taps per channel does NOT EXCEED 80% of the rated output 25W RMS per zone.
AC POWER INPUT (120VAC @ 60Hz or 240VAC @ 50Hz)
As noted in the 'Important Notices', DSP2210/DSP2212 utilize a UL recognized IEC AC power plug and cord (provided with the unit)
which must not be changed or defeated. Please follow these important instructions. Failure to do so will void the product warranties.
The Mains Plug is the main disconnect device for the product, and shall be located so as to be readily accessible.
NOTE: Once the AC power is switched 'ON' it will take approximately '30' seconds to initialize and start up.
•
Do not defeat the safety purpose of polarized, keyed or grounding type connectors. A polarized plug has two (or multiple) contacts
with one wider or longer than the other. A grounding type plug has two blades and a third grounding plug. The wide blade or third
prongs are provided for your safety. Do not defeat or change these. If the provided IEC power plug does not fit into your outlet,
consult an electrician or your local authority having jurisdiction to replace the outlet to insure meeting local building codes while
assuring proper connection
•
Protect the power cord from being walked on or pinched particularly at the plug, receptacle outlet, and the exit point of the unit
AC cable with IEC plug provided. All
120VAC
Power
AtlasSound.com
Digital Processor
and Amplifier
Amp Outputs (70V)
50W RMS / ZONE
wiring to meet NEC/ UL code
Specifications are subject to change without notice.
+
–
AC POWER IN
Replace AC Fuse with UL
recognized 2A @ 250VAC or
5A @ 110VAC
Fuse
(2A @ 250V AC)
or
(5A @ 150V AC)
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 8 –
Owner's Manual
+
–
70V SPEAKERS
Typical view of
UL rated Fuse