Alert Works EAR-10 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Wetter Radio Alert Works EAR-10 herunter. Alert Works EAR-10 16 Seiten. Emergency alert weather radio

Seite drucken

Backlight Display

The switch on the left side of the unit controls the "Hi" or "Low" backlight display.

Programming Notes

 Start Over - If you want to start over while programming, press MENU

continuously until the unit exits the programming mode.

 If no program buttons are pressed - for about one minute the weather

radio will exit the menu mode.

Programming the Clock

 Press MENU to open the menu options.

 Press UP directional arrow to scroll through the menu until you see

"TIME."

 Press SELECT. (HOUR option will begin flashing)

 Press UP directional arrow until current hour is displayed. Note that

AM/PM changes as you scroll through the hours.

 Press RIGHT directional arrow to save current hour and advance to

minute settings.

 Program the minutes the same way as with the hours

 Press SELECT to store the current time. Press MENU to exit the

programming mode.

Programming the Alarm:

 Press MENU to open menu options,

 Press UP directional arrow to scroll through the menu until you see

"ALARM." Then press SELECT.

 Press UP directional arrow to display "ON". Press SELECT. This will

activate the alarm time options. You will see the alarm hour flashing.

 Press UP directional arrow to select the hour you want displayed. Note

that AM/PM changes as you scroll through the hours.

 Press RIGHT directional arrow to save the alarm hour and advance to the

alarm minutes. Program the minutes the same way as with the hours.

 Press SELECT to save the alarm time. The display will show "ON," and

the alarm icon will be displayed.

 Press MENU to exit the programming mode.

To temporarily silence the sleep alarm, press WEATHER/SNOOZE. This will

advance the alarm time by 9 minutes. To silence the alarm for the remainder of

the day, press MENU.