Atlas fan company Acqua Gebrauchsanweisung - Seite 7

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Fan Atlas fan company Acqua herunter. Atlas fan company Acqua 18 Seiten. Ceiling mounted rotational fan ac 220-240v~, 50/60hz
Auch für Atlas fan company Acqua: Anleitung Handbuch (10 seiten)

Atlas fan company Acqua Gebrauchsanweisung
MAKING THE ELECTRICAL
CONNECTIONS
Warning: The power should have already been
disconnected. Follow the steps below to connect
the fan to your household wiring. Loosen the
screws on the terminal block, insert the wire to
each terminal block and re-tighten the screws
loosened previously. Make sure there are no
loose strands or connections.
NOTE: The Hand Held Remote Control units
included with your ceiling fan are equipped with
16 code combinations to prevent possible
interference from or to other remote units. The
frequency switches on your Receiver and
Transmitter units have been preset at the
factory. Please re-check to make sure the
switches on both units are set to the same
positions. The frequency settings should be
changed only in case of interference or if a
second or more remote controlled ceiling fans
are installed in the same room. Any code
combination will operate the ceiling fan and light
as long as the Receiver and Transmitter units
are set to the same codes. (6)
1. Insert Receiver into Hanger Bracket with the
flat side of the Receiver facing the ceiling. (Fig. 7)
2. Connect the green/ground wires from the
downrod ball to the terminal block "
8 &11)
3. Connect the green/ground wires from the
household and ceiling fan to the terminal block "
@
" hole. (Fig. 8 & 11)
4. Connect the white, neutral receiver neutral
wire to the neutral household neutral wire.
Connect the black, Live/hot receiver Live/hot wire
to the Live/hot household Live/hot wire (Fig. 9 &
11).
Receiver
Green/
Ground
" hole. (Fig.
(household)
Green/Ground
(downrod)
Green/Ground
(female plug)
Live/Hot
(household)
Neutral
(household)
6
Code switch
Figure 6
Figure 7
Terminal
block
Female plug
Figure 8
Figure 9
Hanger
bracket
Screw driver
Green/Ground
(Hanger bracket)
Black
(receiver)
Receiver
White
(receiver)