Alert-it Care Systems P161B Benutzer-/Installateurhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzer-/Installateurhandbuch für Sicherheitssystem Alert-it Care Systems P161B herunter. Alert-it Care Systems P161B 13 Seiten. Radio door activity monitor

Seite drucken

Battery Low

The battery status is checked every time the door opens. As the battery approaches

discharge the pager will indicate FAULT 30. If the battery is unable to support con-

tinued use then the alarm will become FAULT 31. The front alarm LED will pulse

every 8 seconds. At the end point the unit will chirp.

Special Power-Down Version (P161-Z0050)

In this version inserting and removing the Blue Key will power-down the sensor

for semi-permanent disabling, with no need to leave the key in and risk its possible

loss. To re-activate the HELP button is pressed until a beep is heard.

Cleaning

Use Alert-iT procedure

Technique B

Wiping with cotton wool pads moistened (compressed until dripping stops) with a

mild detergent (0.5% washing up liquid) solution.

Battery

This can be done in situ, after

removing the two front screws

and pulling the cover over the

key connector. The battery needs

to be ejected from the holder by pressing from inside using a thin object such as

screwdriver, cocktail stick or cotton bud. Once the rim appears it can be removed.

NOTE the orientation of the battery with + side upwards, and the seal ring invisible.

Fit the new battery in the same orientation. Now press the HELP button for more

than 5 seconds. This will re-activate your unit.

Replace the cover

UH1115 P161B Door Activity Handbook.ppp page 6 of 12

Operation (cont)

Maintenance

Battery Life

Battery

12 months/12000 alarms

CR3025 Lithium Coin Cell