247Security mDVR600 Series Kurzanleitung - Seite 13

Blättern Sie online oder laden Sie pdf Kurzanleitung für DVR 247Security mDVR600 Series herunter. 247Security mDVR600 Series 14 Seiten.

ALTERNATIVE PROCEDURE FOR AIMING CAMERAS WITHOUT A LAPTOP

If an on-site laptop is not available to aim your cameras, use the bundled RCA Adapter to connect to a portable

television set using a composite video connector. The following is the procedure for using the RCA Adapter:

1. Turn on your DVR and connect your cameras and cables to the DVR.

2. Proceed to a camera of your preference and disconnect the Camera Cable from that camera port on the

DVR.

3. Attach the Camera Cable to the rear of the RCA Adapter.

4. Attach the long dongle of RCA adapter to the DVR.

5. Attach your portable television set to the RCA Adapter using a composite/RCA video cable and adjust the

camera as needed from the screen.

6. Reverse the above steps to remove the RCA Adapter and restore the connection to as it was prior.

Thank you for choosing 247Security Inc. For any questions regarding the installation procedure, please contact 247Security Inc.

247Security Inc. | 4400 North Point Parkway, Suite # 158, Alpharetta, GA 30022, USA | 1-866-693-7492 | www.247securityinc.com

The RCA Adapter has male and female Molex connectors that prevent the

connection of the cameras and cables in reverse.

Using this alternative method with the RCA Adapter to adjust your

cameras does not offer the ability to modify your DVR's internal software

configuration and does not provide audio preview from the cameras'

microphones.

1-866-693-7492.

Technical Support at