Anova TP4600 Anleitung & Benutzerhandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Anleitung & Benutzerhandbuch für Elektrowerkzeug Anova TP4600 herunter. Anova TP4600 12 Seiten. Battery pruning shears
Seite drucken
3.6 Blade replacement
1. To ensure your safety, please remove the battery before handling the blade.2. Step by step, as shown
below, replace the blade.3. After replacement, clean the blade, turn on the scissor and test to see if
everything is correct.
1. Remove the screws with a screwdriver and open the cover.2. Remove the screws from the blade nut
retainer (this step is important)3. Remove the blade nut
4. Remove the pin and remove the moving knife5. Remove bedknife.6. When replacing the blades,
lubricating oil should be added between the blades
7. Replace the blade8. Insert the nut9. Install the lock nut
Support blade and moving blade can be replaced independently; As a replacement, don't worry
about too small a blade opening; after recovering the power of the scissor, the normal opening size will
recover automatically.
4. Maintenance
4.1 Scissor maintenance
1. Do not cut branches outside the cutting range; do not cut non-vegetable materials, such as metals and
stones, etc. do not use clamps or the like to hold the scissors; Always replace the cutting blade if it is
worn or damaged.
2. Keep the cutting equipment clean, clean the scissors, batteries and charger with a clean cloth (do not
use corrosive detergents!) and a soft brush or dry cloth to clean the dust on the upper scissors.
3. Do not immerse the scissors, batteries and charger in water or other liquids;
4. Use the equipment correctly; Stop using it when there is damage to the scissor, batteries and/or
chargers.