DS Produkte Z 08888 Gebrauchsanweisung - Seite 2

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Außenleuchte DS Produkte Z 08888 herunter. DS Produkte Z 08888 4 Seiten.

Instruction manual
GB
Product number Z 08888
Dear customer,
We are delighted that you have decided on purchasing these deco-
rative solar lights. If you have any questions, please contact cus-
tomer service via our website:
www.service-shopping.de
Proper use / warranty
The solar light is suitable for use in outdoor areas. The storage
battery charges during the daytime via the solar fi eld. The ac-
cumulated energy allows the LED light to illuminate in the dark.
The product is designed for private use and is not intended for
commercial use. Only use the product as instructed. Any other
use is deemed improper. Store the instructions in a safe place.
Defects arising due to improper handling, damage or attempts
at repair are excluded from the warranty. This also applies to
normal wear and tear.
Important notes
❐ Attention! Danger of suffocation! Keep the packaging material
away from children and animals.
❐ The product is not a toy! Keep children and animals away from
the product to avoid injury.
❐ Do not disassemble the product (except for removing the stor-
age battery prior to disposal). Only have the product repaired
by a qualifi ed workshop or by customer service.
❐ If a storage battery has leaked, ensure that the battery acid
does not come into contact with your skin, eyes, and mucous
membranes. In case of contact with battery acid, rinse the af-
fected areas immediately with plenty of clean water and seek
immediate medical attention.
❐ Storage batteries may not be disassembled, disposed of in fi re,
immersed in liquids or short circuited.
❐ Do not allow the product to fall and do not subject it to severe
percussions.
❐ Do not use the product if it exhibits visible damages.
❐ Use suitable mounting material to mount the product. Mounting
material is included in the product contents. Check if it is suit-
able for your application as the mounting material to be used
depends on the composition of the wall on which you would like
to mount the product.
❐ Never submerge the product in water or other liquids! It is only
splash-proof.
❐ To enable an automatic activation of the LED light, the solar
light should not be situated near other light sources such as
street lamps or other lamps.
Product overview
Product contents
2 LED solar lights
Mounting material (screws and dowels)
Solar fi eld
Solar unit
LED light
Wall
bracket
Start-up
The storage battery must charge for approximately 6 to 8
hours in order for the LED light to illuminate.
1. Unpack the product contents and remove any protective foils
(e.g. from the solar fi eld) or stickers. Check all parts for any
damages from transport. Should you identify any transport
damages, please promptly consult customer service.
2. Place the solar light in a location where the solar fi eld is ex-
posed to direct sunlight the whole day, if possible. Mounting
material is included in the product contents. However, the type
of mounting material depends on the composition of the wall
on which you would like to mount the light. If you are unsure
whether the enclosed mounting material is suitable for your ap-
plication, consult an appropriately qualifi ed outlet if necessary.
3. An On/Off switch is located on the bottom side of the solar unit.
Pull the solar unit off of the solar light. Set the switch to the ON
position to turn on the solar unit. Then place the solar unit back
on the solar light.
Sunlight will now charge the storage battery. At dusk, the LED
will automatically turn on. At dawn, the LED will turn off and the
storage battery will be recharged via the solar fi eld.
4. To completely deactivate the solar light, pull the solar unit off
of the solar light and set the On/Off switch to the OFF position.
Then place the solar unit back on the solar light.
Cleaning
Ensure that the solar fi eld is always clean in order to ensure the
greatest possible collection of light. Therefore, clean the solar fi eld
or the light occasionally with a damp cloth. Do not use corrosive
or abrasive cleaning products to clean the product! They could
damage the surface.
Technical data
Model number:
AK-5023B
Product number:
Z 08888
Power supply:
1.2 V DC (1x storage battery,
Ni-MH, 600 mAh, type AA)
Storage battery charging time: approx. 6–8 hours (in sunlight)
Lighting time:
up to 8 hours
(with a fully charged storage battery)
Disposal
The packaging material is recyclable. Dispose of the pack-
aging in an environmentally-friendly manner and make it
available to the collection service for recyclable materials.
Dispose of the product in an environmentally-friendly man-
ner. The product does not belong in the household gar-
bage. Dispose of it at a recycling centre for old electric and
electronic equipment. For more information, please con-
tact the administration in your community.
Batteries and storage batteries must be removed and dis-
posed of separately before disposing of the product. To
protect the environment, batteries and storage batteries
may not be disposed of together with normal household
waste. Instead they must be turned in at appropriate col-
lection points. Be sure to observe applicable legal regula-
tions on battery disposal.
Removing the storage battery
Remove the solar unit from the solar light. Open the solar
unit by removing the screws and dispose of the storage
battery.
Customer service / importer:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany
Tel.: +49 (0) 38851 314650 *)
*) Calls subject to a charge.
All rights reserved.
Z 08888_V1