DSC PC51O Gebrauchsanweisung - Seite 11

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Sicherheitssystem DSC PC51O herunter. DSC PC51O 16 Seiten. Pc51o
Auch für DSC PC51O: Installationshandbuch (20 seiten)

Seite drucken

1. Arming Your System

TESTING

Bell Test

Entering this command will sound the siren and turn ON all the keypad lights for 2 seconds. To perform a

∗

bell test, enter [

][4] on the keypad.

Weekly Testing

It is recommended that you test your system weekly.

1 Disarm the system and ensure that the "Ready" light is ON.

2 Perform a Bell Test by entering [

on the keypad will come ON.

3 Activate each sensor on your system in turn. For example, open protected doors and windows, and

walk in areas protected by motion detectors. Each Zone Light should come ON when each zone is

activated. Each Zone Light will be shut OFF when the zone is restored to normal (when the door or

window is shut, or when motion stops in areas protected by motion detectors).

4 If they are programmed for operation, press the [F], [A], and [P] keys in turn. The [F] key will sound the

bell or siren in a pulsed mode. Enter an Access Code to silence the alarm. The [A] key is a silent

alarm. After pressing the [A] key, enter an Access Code to cancel the alarm. The [P] key may be

programmed as silent or audible. After pressing the [P] key, enter an Access Code to cancel the

alarm.

5 Should the system fail to operate properly, call your alarm dealer for service.

∗

][4]. The bell or siren will sound for 2 seconds and all of the lights