Anslut 012894 Betriebsanleitung - Seite 15

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Fan Anslut 012894 herunter. Anslut 012894 17 Seiten. Pipe fan

Seite drucken
Anslut 012894 Betriebsanleitung

TECHNICAL DATA

Voltage
Output
Duct
Air flow
Safety class
Protection rating
Operating temperature
Air temperature in ventilation system < 40°C
Noise level
Size
DESCRIPTION
• Axial fan made of plastic for supply and
exhaust air ventilation of small and
medium size homes heated during the
winter. The product is intended to be
connected to a Ø100 mm air duct.
• The product is intended for continuous
operation and permanent connection to
the mains. The air flow in the system must
correspond to the arrow on the fan
casing.

INSTALLATION

1.
Switch off the power supply.
FIG. 1
2.
Remove the cover and clip on the junction
box.
FIG. 2
3.
Connect the fan to the mains, replace the
clip and set a delay, if necessary.
FIG. 3
4.
Replace the cover on the junction box.
FIG. 4
5.
Connect the air ducts on each side of the
fan.
FIG. 5
6.
230 V ~ 50 Hz
14 W
DESIGNATIONS IN WIRING
Ø100
DIAGRAM
107 m
/hour
3
L
II
IPX4
N
1 to 45°C
QF Automatic fuse
S
56 dB
115 x Ø98 mm

MAINTENANCE

1.
2.
FIG. 6
3.
FIG. 7
4.
FIG. 8
5.
FIG. 9
6.
NOTE:
•
•
Connect the power supply.
Live wire
Neutral wire
External power switch
Switch off the power supply.
Release the air ducts.
Clean the product with a cloth moistened
with water and a mild detergent. Wipe
the surface dry.
Use a small brush or paintbrush to clean
the fan vanes and the inside of the fan.
Connect the air ducts to the fan.
Connect the power supply.
Make sure no water gets into the
electrical components.
Maintenance should be carried out at
least once every 6 months.
EN
15