DSC Power 832 Einbauanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Einbauanleitung für Kontrolleinheit DSC Power 832 herunter. DSC Power 832 2 Seiten. Central station talk / listen module
Auch für DSC Power 832: Gebrauchsanweisung (11 seiten), Gebrauchsanweisung (18 seiten), Gebrauchsanweisung (2 seiten), Installationsanleitung Handbuch (12 seiten), Benutzerhandbuch (20 seiten), Einbauanleitung (2 seiten), Installationshandbuch (17 seiten)

DSC Power 832 Einbauanleitung
3. Wire the station to the PC5908/PC5928. To wire the power, connect the +VS to
AUX and GND to COM (red = positive; black = negative). The MIC and SPK
terminals on each PC5904 must be connected to a pair of M and S terminals on
the PC5908/PC5928
speaker; the green wire is the microphone. Consult the wiring diagram below:
NOTE: There are two AUX and COM terminals located on the PC5908/
PC5928. The PC5904 can be connected to either terminal.
4. The speaker volume and microphone sensitivity can be adjusted by turning the
potentiometers labelled MIC and SPK, as indicated in the diagram above.
5. Once all wiring is complete, mount the station to the backplate.
We suggest that wall anchors be used for all screw locations. When the
wall anchors have been placed, secure the backplate to the wall.
FCC COMPLIANCE STATEMENT
CAUTION: Changes or modifications not expressly approved by Digital Security Controls Ltd. could void your authority
to use this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Re-orient the receiving antenna.
I
Increase the separation between the equipment and receiver.
I
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
I
Consult the dealer or an experienced radio/television technician for help.
I
The user may find the following booklet prepared by the FCC useful: "How to Identify and Resolve Radio/Television
Interference Problems". This booklet is available from the U.S. Government Printing Office, Washington D.C. 20402,
Stock # 004-000-00345-4.
Digital Security Controls Ltd. 160 Washburn St., Lockport, NY 14094
© 1997 Digital Security Controls, 1645 Flint Road, Downsview, Ontario, Canada M3J 2J6
(eg. M1 and S1 for Station 1). The yellow wire is the
(416) 665-8460 • 1-800-387-3630
Printed in Canada 29001908 R1