Attonic FG1 Betriebshandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Messgeräte Attonic FG1 herunter. Attonic FG1 20 Seiten. Digital force gauge

8.Checking method on history data and function description

Measure in peak mode and press the "RES" switch to save the value at that time.

You can go back and check the history of those values.

■Check history data

To check history data, long press the "DAT" switch until you hear a beep.

When the display shifts to history check screen, "MO" will be displayed in the upper right corner of the screen.

If "MO" is not displayed, long press the "DAT" switch again until you hear a beep.

* Please note that it is set longer so that the measurement mode will not be switched due to a malfunction

during measurement.

To complete the setting, long press the "FUN" switch again until you hear a beep.

The "MO" in the upper right conner of the screen disappears and the gauge becomes measurement mode.

8-1.Display history data

You can check the stored data.

The N:〇〇〇 at the top center of the screen is the number of imported data.

1000 data from N：000 to N：999 can be imported.

* The larger the number of N:〇〇〇, the newer the data.

* When the number is more than N：999 (over 1000 data), the old data will be overwritten.

"POW" switch

* Short press the "FUN" switch to move to the batch transfer function.

* Long press the "FUN" switch to return to the measurement mode.

"POW" switch

"DAT" switch

N：〇〇〇 decreases every

time the "DAT" switch is

pressed.

"DAT" switch

"POW" switch

N：〇〇〇 increases every

time the "POW" switch is

pressed.

"POW" switch