ATW MINI 8 Benutzerhandbuch - Seite 14
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Wärmepumpe ATW MINI 8 herunter. ATW MINI 8 18 Seiten. Air-to-water heat pump
Seite drucken10.2.11 Factory settings
If the panel is not responding, or you have made a setting that led to a non-standard function, it is possible revert
the panel to its factory settings:
1. Press the button on the panel for more than 10 seconds. (Note: the button may not be accessible when the
panel is installed in a unit.)
2. Perform the calibration 3x upper left corner, 3x lower left corner, 3x right center.
Factory settings:
- Sound:
-
Backlight (external power)
-
Backlight (battery)
:
- Language:
- Network settings:
- Password:
- Other settings:
10.3. WEB INTERFACE OF THE PANEL
If the panel network interface is set correctly, it is possible to monitor and control the device from any web
browser by entering the relevant IP address.
After login, the main screen is displayed. It is divided into five basic monitoring windows and buttons serving to
enter the device settings.
Outdoor
temperature
Indoor
temperature
Status of the device
: The status icons are the same as on the touch panel (see Chapter 1).
on
:
on
30 seconds
English
IP:192.168.0.100
MASK:255.255.255.0
GW:192.168.0.1
1937 (user is always admin)
remain in original state (timer)
Default login:
User:
admin
Password:
1937
Current status of the device
Current time and date
14
HDW tank
temperature
Output water
temperature
Settings