AU Qua tab PX Grundlegendes Handbuch

Blättern Sie online oder laden Sie pdf Grundlegendes Handbuch für Tablette AU Qua tab PX herunter. AU Qua tab PX 3 Seiten.

Preface
Thank you for purchasing the "Qua tab PX" (simply
called the "product" from here on).
Before using the product, be sure to read the supplied
"Setting Guide", "Notes on Usage", "Basic Manual"
(this manual) or "User Guide 取扱説明書 詳細版 (Full
Instruction Manual)" (Japanese) available on the au
homepage to ensure correct use. After you have
finished reading this manual and the printed manuals
supplied, be sure to store them in safe places so that
you can retrieve them whenever needed. If you lose
the printed manuals (supplied), contact an au shop or
Customer Service Center.
Basic Manual
For detailed operation methods, refer to "Basic Manual" application installed on
the product.
May 2016, 1st Edition
MBM65345002(1.0)
For inquiries, call:
Description
On the Home
Customer Service Center
screen u [ ]
For general, charge, operations
(toll free)
Business hours 9:00 – 20:00
(7 days a week)
■ Illustrations■and■screen■displays
From fixed-line phones:
From au cell phones:
Illustrations and screens shown in this manual may
0077-7-111
157
area code not required
look different from the actual product or screen.
PRESSING ZERO WILL CONNECT YOU TO AN OPERATOR
In some cases, minor details or a part of a screen
AFTER CALLING 157 ON YOUR au CELL PHONE
may be omitted.
For service canceling procedure in case of loss or theft
(toll free)
Business hours 24-hour (7 days a week)
From fixed-line phones:
From au cell phones:
0077-7-113
113
In this manual,
area code not required
icons, etc. of
In case above numbers are not available,
a screen are
0120-977-033
(except Okinawa)
omitted.
0120-977-699
(Okinawa)
Keitai Guarantee Service Center
For loss, theft or damage
(toll free)
Business hours 9:00 – 20:00
(7 days a week)
It is very dangerous to charge
From fixed-line phones/au cell phones,
the product in a wet state,
this could cause abnormal
0120-925-919
heat generation or a burnout.
Cell phone and PHS operators collect and
recycle unused telephones, batteries and
battery chargers at stores bearing the
logo regardless of brand and manufacturer
to protect the environment and reuse
valuable resources.
Sold by: KDDI CORPORATION,
OKINAWA CELLULAR TELEPHONE COMPANY
Imported by: LG Electronics Japan Inc.
Manufactured by: LG Electronics Inc.
■ When■au■Nano■IC■Card■04■LE■is■not■inserted
au Nano IC Card 04 LE
When the au Nano IC Card 04 LE is not inserted, the
The■au■Nano■IC■Card■04■LE■contains■a■phone■number■
following operations are not available.
and■other■information.
• Receiving/sending and initial settings of e-mail (@
ezweb.ne.jp)
• The product is
《au Nano IC Card 04 LE》
compatible with au
• Receiving/sending SMS
Nano IC Card 04 LE.
• Checking the phone number and mail address of this
product.
• Setting up SIM card lock
IC (metal) part
Besides the above, some functions requiring your
phone number might not be available.
memo
■ Restriction■settings■with■PIN
• Note the following points, which may cause
You can set the product to restrict the use of the
malfunction or damage, when handling the au Nano
product by others through changing the PIN code
IC Card 04 LE.
or locking the SIM card in order to protect your
- Do not touch the IC (metal) part of the au Nano
important private information while you are using your
IC Card 04 LE.
au Nano IC Card 04 LE.
- Insert in the correct direction.
- Do not use force to attach or remove the IC
Attaching/Removing au Nano IC
card.
Card 04 LE
• When the au Nano IC Card 04 LE is not attached
properly or the au Nano IC Card 04 LE is abnormal,
Attaching■au■Nano■IC■Card■04■LE
an error message appears.
• Do not lose the au Nano IC Card 04 LE after it has
Before attaching the au Nano IC Card 04 LE, make
been removed.
sure to turn the product off.
• Do not insert the au Nano IC Card 04 LE with a
Hook the groove of the tray with your
a
conversion adapter. Doing so may cause a fault.
fingernail and pull it out straight to remove the
tray from the main unit.
- 11 -
On the status bar of the screen top,
is displayed
Charging■with■a■PC
to show the charging is starting. When the
charging is finished,
is displayed.
Insert the microUSB connector of the
a
When charging is completed, remove the
microUSB cable (sold separately) directly into
c
microUSB connector of the common AC
the external connection terminal of the product
adapter 05 (sold separately) straight from the
• Insert the microUSB connector straight with the "B"
external connection terminal of the product
mark facing up.
Insert the microUSB connector of the
b
Remove the power plug of the common AC
d
microUSB cable (sold separately) straight into
adapter 05 (sold separately) from power
the USB port of the PC
outlet
memo
When■ ■is■not■displayed
• Wait until
is displayed on the status bar of
the top screen. Bad connection is assumed if it
does not appear after a while. Check if Common
AC adapter 05 (sold separately) is securely
connected. If it still does not appear, stop charging
USB port of a PC microUSB cable (sold separately)
and contact an au shop or a Keitai Guarantee
Service Center.
memo
• Although charging with the power of the product
on is available, it takes longer.
• It may take longer to charge with USB than the
specified AC adapter (sold separately).
• When the "Start new hardware search wizard"
window appears, select "Cancel".
- 17 -
List of Packaged Items
Before your start using the product, make sure that
you have all the following packaged with the product.
●Main unit
The following items are not included in the package.
●microUSB cable
●microSD memory card
●Earphone
memo
• Purchase a specified charger (sold separately).
• The battery is built into the product.
• The illustrations in the manual are used only for
explaining. They may differ from the actual product.
- 1 -
Explanation
memo
Tap
on the bottom of Home
• In this manual, screenshots for body color "White"
screen.
are provided as examples.
• In this manual, except as specified, the descriptions
of operation procedures are those with keys/
buttons.
• Descriptions in this manual are based on the
operations of portrait screen. Menu items/icons/
buttons on a screen may be different from the
Actual screen
Screen in this
ones in the horizontal display.
manual (example)
• In this manual, operation procedures are described
based on au Basic Home. When the home
application is changed by "Select Home" etc.,
operation procedures may be different.
• Items, title levels, and icons in this manual may look
different based on different functions you use or
different conditions, etc.
• In this manual, "microSD™ memory card",
"microSDHC™ memory card" or "microSDXC™
memory card" is called "microSD memory card" or
"microSD" for short.
• All of the indicated amounts exclude tax unless
otherwise specified.
- 6 -
Put the au Nano IC Card 04 LE into the tray
b
with the IC (metal) part downwards, insert the
tray into the main unit, and then push it firmly
all the way straight into the slot.
• Note the direction of the notch.
• Insert the au Nano IC Card 04 LE so that it is tightly
attached to the tray.
• Make sure that there is no gap between the tray and
the main unit.
- 12 -
- 13 -
Turning the Power On/Off
Turning■the■Power■On
Power key (Press and hold for more than 2
a
seconds)
The lock screen appears.
Swipe the screen to unlock.
Turning■the■Power■Off
External
Power key (Press and hold for more than 2
a
connection
seconds)
terminal
[Power off] u [POWER OFF]
b
b
a
- 18 -
- 19 -
About Operating Instructions
●取扱説明書 (Basic Manual) (Japanese)
● 設定ガイ ド (Setting
Handles only basic operations for main features.
Guide) (Japanese)
For detailed descriptions on various functions,
● ご利用にあたっての注意事
refer to the "Basic Manual application" installed on
項 (Notes on Usage)
the product or "User Guide 取扱説明書 詳細版 (Full
(Japanese)
Instruction Manual)" (Japanese) available on the au
● 取扱説明書 (Basic
homepage.
Manual) (Japanese)
http://www.au.kddi.com/support/mobile/guide/
● 保証書 (Warranty)
manual/
(Japanese)
• All company names and product names in this
manual are either trademarks or registered
●AC adapter
trademarks. The
,
marks may be omitted in this
TM
®
manual.
Basic Manual application
You can use the "Basic Manual application" on the
product to confirm detailed operational procedures.
Certain functions can be directly activated from the
application screens on which their operations are
described.
On the Home screen u [au Supports] u [Basic
a
Manual]
• When you activate for the first time, follow the
onscreen instructions to download and install the
application.
- 2 -
- 3 -
Names and Functions of Parts
a
b
《Top side》
c
《Bottom side》
《Front side》
- 7 -
- 8 -
Removing■au■Nano■IC■Card■04■LE
Before removing the au Nano IC Card 04 LE, make
sure to turn the product off.
Hook the groove of the tray with your
a
fingernail and pull it out straight to remove the
tray from the main unit.
Remove the au Nano IC Card 04 LE, insert the
b
tray into the main unit, and then push it firmly
Notch
all the way straight into the slot.
• Make sure that there is no gap between the tray and
the main unit.
Groove
IC
- 14 -
Lock Screen
This■screen■is■displayed■when■turning■the■power■on■
or■sleep■mode■is■canceled.
On■the■Lock■screen,■you■can■check■the■date■and■
time,■and■notification■information■as■well■as■use■
application■shortcuts.
Status■bar
a
a
Date■&■time
b
b
Notification■information
c
New informaiton such
as a received mail,
c
auシェアリンク (au
ShareLink). etc.
Application■shortcut
d
Swipe to launch an
application.
* The application
shortcuts to display
can be changed.
d
Unlocking■the■Lock■screen
Swipe on the lock screen
a
The Home screen appears.
• The unlock method differs depending on the screen
lock settings.
- 20 -
Downloading Manuals
You can download the English version of the
Basic Manual from the au website (available from
approximately one month after the product is released).
You can find "Basic Manual" (English excerpts from
Instruction Manual) on au homepage.
Download URL: http://www.au.kddi.com/support/
mobile/guide/manual/
*
You can use the English version of the manual from
the Basic Manual application.
- 4 -
d
j
k
f
g
h
e
i
l
n
《Left side》《Right side》
《Back side》
- 9 -
Charging
When■you■purchase■your■tablet,■the■internal■battery■
is■not■fully■charged.■Charge■the■internal■battery■when■
you■use■it■for■the■first■time■or■when■its■battery■is■not■
enough.
memo
• While charging, the product and its internal battery
might become hot (when activating camera or
communicating data while charging, the internal
battery becomes hot).
• It may take longer to charge the internal battery
when you use camera function, etc. while charging
the battery.
• Operating with the specified charging equipment
(sold separately) being connected might cause
short-time charge/discharge repeatedly. Life of
the internal battery becomes shorter when you
repeatedly charge it frequently.
- 15 -
Setting Application Authority
When■activating■the■applications/functions■that■
access■the■functions■or■information■of■the■product■
for■the■first■time,■the■confirmation■screen■appears■to■
request■the■permission■for■the■access■authority.
When■the■confirmation■screen■appears,■confirm■the■
content■and■tap■"DENY"■or■"ALLOW".
Example:■To■activate■Photo
On the Home screen u [Google] u [Photos] u
a
[ALLOW]
The application launches.
- 21 -
Regarding Notations Used in This
Manual
■ Key/button■indications
In this manual, keys/buttons are represented by
simplified illustrations as shown below.
Q button
Power key
Volume key
■ Description■of■operations■for■selecting■item/icon/
button■etc.
The notations used for operation procedures in this
manual are as follows.
Tap means to lightly touch and release the button or
icon shown on the display to select it.
Description
Explanation
On the Home
Tap
(Chrome) on the bottom
screen u [ ] u [ ]
of Home screen. And tap
.
- 5 -
Microphone
a
Earphone■jack
b
External■connection■terminal
l
c
Inward-facing■camera■(lens)
d
Display■(Touch■panel)
e
Power■key
f
Volume■key■(UP/DOWN)
g
Q■button
h
Activates a set application.
Tray
i
Stores the au Nano IC Card 04 LE/microSD memory card.
Outward-facing■camera■(lens)
j
Built-in■antenna■(Wi-Fi
®
,■Bluetooth
®
,■GPS)
*
m
k
Built-in■antenna■(Internet)
*
l
Vent■hole
m
Combines inner and external pressures.
Speaker
n
* Do not cover the built-in antenna with your hand or put
stickers etc. Data communication quality becomes
worse.
- 10 -
Charging with the Specified AC Adapter
(Sold Separately)
Describe how to charge by using the common AC
adapter 05 (sold separately).
For details on the specified AC adapter (sold
separately), refer to "Introduction of Related
Accessories".
Insert the microUSB connector of the common
a
AC adapter 05 (sold separately) straight into
the external connection terminal of the product
• Insert the microUSB connector straight with the "▲"
mark facing up.
External
connection
terminal
microUSB connector
("▲" mark facing up)
Insert the power plug of the common AC
b
adapter 05 (sold separately) into a 100 V AC
power outlet
- 16 -
memo
• If the application authority is not allowed,
applications/functions may not be activated or
using functions may be restricted.
• To change the authority setting, on the Home
screen u [基本機能 (Basic functions)] u [Settings]
u [Apps] u select the application to be changed u
[Permissions] u [
]/[
].
• The explanation screen may be displayed
depending on the application/function.
Also, the confirmation screen may be displayed
several times or the display may be different.
Carefully check the displayed content and follow
the onscreen instructions.
• In this manual, description of the confirmation
screens may be omitted.
- 22 -