AIRTRONICS SD-10G Aero Handbuch zur Schnelleinrichtung - Seite 3
Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Fernsteuerung AIRTRONICS SD-10G Aero herunter. AIRTRONICS SD-10G Aero 8 Seiten. 2.4ghz fhss-3 radio control system
Auch für AIRTRONICS SD-10G Aero: Handbuch (16 seiten), Schnellstart-Handbuch (5 seiten)
Seite drucken
section 1: UsinG tHe tYPe MenU, continUed....
Choose the Desired Wing Type Option
Two Wing Type options are available - either NORMAL or DELTA. Choose the option illustrated below that best matches your
aircraft's wing type.
WING>NORMAL may or may not
include ailerons and/or flaps.
If your aircraft features "Elevons", choose WING>DELTA. If your aircraft is a flying wing and does not feature separate ailerons
and elevators, choose WING>DELTA. If your flying wing features separate ailerons and elevators (not common), choose
WING>NORMAL.
When WING>DELTA is chosen, the elevator and aileron channels are mixed together to provide pitch and roll control.
Choose the desired Aileron Type Option - Normal Wing Type Only
Two Aileron Type options are available - either 1 or 2. Choose the option illustrated below that best matches how the aileron
servos control your aircraft's ailerons. Choose 1 if both ailerons are controlled by a single servo and choose 2 if each aileron
is controlled by its own individual servo.
This option can only be changed if you chose the WING>NORMAL option previously. If WING>DELTA is chosen, this option
cannot be changed because WING>DELTA always uses aileron and elevator mixed together to provide both pitch and roll.
1 Aileron Servo Controls Both Ailerons
*If you're using 1 servo to control each aileron, but you use a Y-Harness to join the two servos together, choose the AILERON>1
option. In addition, some large models use two servos on each aileron. This is different from choosing AILERON>2 as illustrated
above. If your model features two servos per aileron, each pair of aileron servos should be Y-Harnessed together, then
AILERON>2 chosen. The SD-10G does not support more than 2 aileron channels in AERO mode.
Choose the desired Flap Type Option
Two Flap Type options are available - either 1 or 2. Choose the option illustrated below that best matches how the flap
servos control your aircraft's flaps. Choose 1 if your flaps (whether solid or split) are controlled by a single servo and choose
2 if each flap is controlled by its own individual servo.
FLAP>1
1 Flap Servo Controls 1 Flap
*If you're using 1 servo to control each flap, but you use a Y-Harness to join the two servos together, choose the FLAP>1 option.
Email: [email protected]
WING>NORMAL
If your model does not feature any ailerons, choose AILERON>1.
AILERON>1
1 Flap Servo Controls Split Flaps
|
WING>DELTA may or
may not include flaps.
1 Aileron Servo Controls Each Aileron*
If your model does not feature any flaps, choose FLAP>1.
FLAP>1
Website: www.airtronics.net
WING>DELTA
AILERON>2
FLAP>2
1 Flap Servo Controls Each Flap*
| Phone: (714) 963-0329
3