Auber Instruments WS-1211GPH Kurzanleitung - Seite 7
Blättern Sie online oder laden Sie pdf Kurzanleitung für Temperaturregler Auber Instruments WS-1211GPH herunter. Auber Instruments WS-1211GPH 12 Seiten. Programmable precision pid temperature controller
Seite drucken
programming the necessary cooking steps, you can finish programming by pressing the SET
repeatedly until the display passes t-6 and displays the current temperature. You can also leave
the controller alone. The display will return to the normal display mode if no key is pressed within
15 seconds.
Here is the one step heating program. The temperature profile is programmed to start at 150 °F
for 600 minutes of heating.
4. Checking the current step and the time
The user can check step number, total running time, and the time in the current step using the
"Time" or "+" key. Please see the flow chart in Figure 5.
Current temp.
reading
Current step
At normal operating mode, press the "+" key (item 4 in Figure 1) to toggle the display window
between the current temperature and the current step number at which the program is running
(P-X). At time displaying mode, press the "Time" key to toggle the display between the total time
(in minutes) since the controller was powered up and the time past in the current step. For
example, the controller has being running for 100 minutes in total, but currently it is at step 2 for
40 minutes. So when you first press "+" key, controller will show "P-2" in the window. If then you
Table 1. Initial program setting.
Temp
Step #
(F)
C-1
150
C-2
0
C-3
0
C-4
0
C-5
0
C-6
0
Time
080
Press
once
+
Press
once
Time
P-1
Press
once
Figure 6. How to check current step and the time.
Time
Step #
(min)
t-1
600
t-2
0
t-3
0
t-4
0
t-5
0
t-6
0
Total operating time
10
since power up
+
Press
once
Operating time
P 2
on current step
7