Abtus MU-CATHD11R/2-06-ST Handbuch

Blättern Sie online oder laden Sie pdf Handbuch für Extender Abtus MU-CATHD11R/2-06-ST herunter. Abtus MU-CATHD11R/2-06-ST 2 Seiten. Hdmi over cat-5 wall plate extender

SPECIFICATION
MU-CATHD11T/2-06-ST
1×HDMI
Input:
2×RJ45 + 1x 3.5mm
Output:
Controllable via IR pass-through from RX to TX
HDMI Source Control:
Electro-optical characteristics: τ = 25º /
IR Remote Control:
20~60kHz
Carrier frequency:
Type A (19-pin female)
HDMI Connector:
WE/SS 8P8C
RJ45 Connector:
3.5mm jack for IR emitter
3.5MM Connector:
None EQ for signal equalization
ROTARY CONTROL:
HDMI Deep Color
HDMI COMPLIANCE:
Yes
HDCP COMPLIANCE:
Single-link 225MHz (6.75Gbps)
VIDEO BANDWIDTH:
480i / 480p / 720p / 1080i / 1080p60 24/30/36-bit color
VIDEO SUPPORT:
Surround sound (up to 7.1ch) or stereo digital audio
AUDIO SUPPORT:
HDMI over UTP Transmission (24-BIT): Full HD (1080p)-40m (130ft) [CAT-5]
HD (720p/1080i)-50m (165ft) [CAT-5]
N/A 8-level digital rotary control
HDMI Equalizartion:
1.2 Volts (peak-to-peak)
Input TMDS Signal:
5 Volts (peak-to-peak, TTL)
Input DDC Signal:
[1] Human body — ±19kV air-gap discharge
ESD Protection:
& ±12kV contact discharge
[2] Core chipset — ±8kV
PCB stack-up 4-layer board
PCB Stack-Up:
(impedance control — differential 100Ω; single 50Ω)
Wall plate mounting
Fixedness:
12V 1A DC at either TX or RX
Power Supply:
1 Watt (max)
Power Consumption:
Operation Temperature: 0~40°C [32~104°F]
-20~60°C [-4~140°F]
Storage Temperature:
20~90% RH (no condensation]
Relative Humidity:
Metal enclosure
Housing:
95mm × 190mm × 80mm
Gross Dimensions:
620 g
Gross Weight:
* Specifi cations are subject to changes without notice.
** For detail, updated Command Code and Application Software, please visit and download from www.abtussingapore.com
MU-CATHD11R/2-06-ST
2×RJ45 + 1×3.5mm
1×HDMI
3.5mm jack for IR receiver
HDMI over CAT-5
Wall Plate Extender
Model: MU-CATHD11T/2-06-ST
(Transmitter)
Caution : Always ensure that the DDC output on the transmitters connected to the
DDC input of the receiver before connecting the power supply. In no circumstances
should a cable be connected on a DDC port at one end and a TMDS port at the
other. Connecting a cable on DDC to TMDS will permanently damage the product.
ABtUS SINGAPORE PTE LTD
Model: MU-CATHD11R/2-06-ST
(Receiver)
Revision 06102015
www.abtussingapore.com