Audiophile APS PurePower 1050 Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Stromversorgung Audiophile APS PurePower 1050 herunter. Audiophile APS PurePower 1050 19 Seiten. 120 volt models audio power supply

Seite drucken

1. About the Purepower Aps

Rack-Mount

The APS can be installed in 19 or 23-inch racks and needs only 2U of rack space. Mounting rails

or a rack shelf are required for your Audiophile APS. If rails are not already installed in your rack

or included with your APS, contact your PurePower dealer.

Use the following procedure to install the APS in a rack:

· Place the APS on a flat, stable surface with the front of the APS facing toward you.

· Attach the mounting handles to the bracket with the screws provided in the accessory kit.

· Remove the screws attaching the front bezel from one side of the unit. Align the rack

mounting brackets with the screw holes on the side of the APS and replace screws.

· Repeat for the opposite side.

If installing optional PowerPacks, repeat Steps 1 through 4 for each cabinet.

NOTE The PowerPacks must be installed BELOW the APS.

Slide the APS and any optional PowerPacks into the rack. Continue to "Installing the APS" to

complete the installation.

Audiophile Power Supply • www.audiophileaps.com

Installation

| 07