audiopraise VanityPRO Benutzerhandbuch - Seite 16
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schrubber audiopraise VanityPRO herunter. audiopraise VanityPRO 19 Seiten.
Seite drucken
Software Update
The Vanity
PRO
utilizing a medium size FPGA and a 32-bit processor. New features and functionality can be added
at any time and the firmware can be upgraded by the user through an easy-to-use Windows PC
app.
To update the software, the user must put the unit into firmware update mode and follow
a few simple steps.
•
Power off or unplug the power cable of the audio side.
•
Pres and hold the encoder knob.
•
Apply/connect power to the audio side.
•
Wait 2-3 seconds before releasing the knob.
•
Connect USB-B cable to the Service port.
Verify that the unit reports itself in the device manager as "STM Device in DFU Mode".
•
If not, please install STM DFU drivers provided.
•
Run the Audiopraise Firmware Loader. It requires MS C++ 2013 Redistributable to run.
•
Verify the file has been correctly loaded. Select the new firmware file and hit the Upgrade
button.
•
Wait for the firmware to load. Once the new firmware has been verified, you can close the
Loader tool and power cycle the unit.
•
The Vanity
PRO
now should start with the new firmware. You can verify the firmware
version in the System Status screen.
is built on a completely programmable processing and control platform
Page 16 of 19
– User Manual v1.2
Vanity
PRO